Measure the Height: Open the hood and look at the plastic lens of your low-beam headlight. You will see a small circular molded mark—this is the "aim dot." Measure the distance from the ground to the center of this dot. Write this number down . Mark the Wall: Go to the wall and measure up from the ground to the exact same height as your…
morsunled Profile
Jane Jiang
Based in Guangzhou, China, Guangzhou Morun Technology Co.,Ltd is one of the leading led headlights manufacturers and suppliers for Jeep, motorcycles and trucks etc. Jane Jiang is the ceo of Guangzhou Morsun Technology Co., Ltd
Story Submitted
Upgrading Your 2004 GMC Sierra 1500 Converting Halogen Tail Lights to LED morsunled.hatenablog.com bookmark
LED tail lights offer several compelling advantages over the original halogen units. The most significant benefit is safety: LEDs illuminate nearly instantaneously when you apply the brakes, giving drivers behind you precious extra milliseconds of reaction time compared to the gradual warm-up of halogen bulbs . Additionally, the 2004 GMC Sierra led headlights produce a brighter, more intense light that remains highly visible in adverse…
How to Install a Headlight Relay Harness in Your 2004 GMC Sierra 1500 morsunled.wordpress.com bookmark
The 2004 GMC Sierra uses a dual-headlight system with separate bulbs for low beam and high beam on each side. Some relay harness kits are designed for this configuration, while others may require minor modifications. If your kit includes only two output connectors, verify that it is designed to power both filaments of a dual-filament bulb or that you have purchased the correct kit for…
Restoring Cloudy Headlight Lenses on 2000 Sierra Step-by-Step DIY tumblr.com bookmark
Begin by washing the 2004 GMC Sierra headlight lenses thoroughly with soap and water to remove loose dirt and grime. Once clean, use painter's tape to mask off the area around the headlights—this includes the painted bumper, grille, and any chrome trim . The tape protects the surrounding paint from accidental scratches during the sanding process. If you are working on a Sierra with composite…
Retrofitting Modern A/C (R134a or Vintage Air) in a Third Gen Camaro morsunled.substack.com bookmark
The benefits of this approach are substantial. Vintage Air systems use a smaller, more efficient compressor that robs less horsepower from the engine—a noticeable improvement when you are driving a 305 or 350 small-block. The cooling output is consistently cold, often measuring in the 40-degree range at the vents even on 100-degree days. Additionally, the system eliminates the heavy, leak-prone factory components, reducing overall vehicle…
Led Tail Lights for 2018-2021 Polaris RZR Sportsman morsunled.com bookmark
Upgrade your Polaris RZR with premium LED tail lights designed for both performance and safety. Featuring DOT-approved compliance, these lights ensure reliable, street-legal operation while delivering superior visibility. The integrated design combines position light, brake light, and turn signals into one sleek unit, providing clear and responsive signaling in all conditions. Built with high-intensity LEDs and a rugged, waterproof housing, they are perfect for off-road…
How to Replace 3rd Gen Camaro Headlights articlescad.com bookmark
With both headlights reassembled, turn on your headlights to verify proper operation. Test both low beam and high beam functions. If one light does not illuminate, double-check that the electrical connector is fully seated—sometimes it feels connected but is not locked in place. Replacing headlights on a Third Gen Camaro requires patience and the right screwdriver, but it is a job any owner can tackle…
Classic Look: Retrofitting Bluetooth Audio in a Third Gen Camaro atoallinks.com bookmark
When installing any hidden audio system, you must consider how it draws power—and this is where your Third Gen Camaro’s headlight system enters the discussion. The factory electrical system in these cars was designed for a specific load, and adding modern electronics requires thoughtful integration. Many enthusiasts tap into the fuse block for switched 12V power to feed their Bluetooth receiver or RetroSound unit. While…
A Universal Power Window Retrofit for the Third Gen Camaro storeboard.com bookmark
When it comes to the electrical side of a power window retrofit, you have two primary paths. The first is sourcing a factory power window harness from a donor Third Gen Camaro at a salvage yard. This approach gives you GM-engineered connectors and a harness designed to fit the car's existing routing channels, including the plastic conduit that runs under the front windshield . However,…
Retrofitting 4th Gen LS1 Brakes on a Third Gen Camaro uberant.com bookmark
The 4th Gen LS1 brake swap is one of the most worthwhile upgrades a Third Gen Camaro owner can undertake. It addresses a genuine safety concern, enhances driving enjoyment, and does so without breaking the bank. When combined with a careful inspection of your car's aging wiring—including the headlight circuits—this retrofit modernizes your Third Gen in ways that make it safer, more capable, and more…