Beta RR Fork Seal Replacement: Step-by-Step Repair Guide gzmorsunled.wixsite.com
Support the bike with the front wheel off the ground, remove the front wheel and fender, then loosen the triple clamp pinch bolts and slide each fork leg out. On the bench, unthread the fork cap carefully—the spring is under preload and will push against the cap as the last threads release. Remove the cap, spring, and spacer, then drain the old oil by inverting the leg and pumping it several times. Pry out the dust seal and remove the retaining circlip from the top of the slider. To separate the slider from the inner tube, hold the cartridge rod stationary with the holding tool and unthread the base valve from the bottom of the slider; the cartridge can then be pushed out from the bottom. With the tubes separated, pry out the old oil seal, clean the seal seat thoroughly.