Adding a Throttle Response Controller to Your Dodge Ram 1500 – Industry Mag industrymag.org

For these reasons, installing a throttle response controller is the perfect time to perform a headlight re-aiming check. Park your 2018 Ram on level ground exactly 25 feet from a flat wall with a full tank of gas and any typical cargo in the bed. Measure from the ground to the center of each 2018 Dodge Ram 1500 headlights bulb and mark that height on the wall with tape. Using a 7mm socket on an extension, locate the vertical adjustment screw accessible through a hole in the inner fender. Turn the screw to lower or raise the beam so that the top of the low-beam cutoff is approximately 2 to 2.5 inches below the center mark on the wall. This five-minute adjustment ensures that your newly responsive throttle does not lead to unsafe nighttime driving conditions.