Upgrading to Chevy S-10 HID Projector Retrofit atoallinks.com

Begin by disconnecting the truck’s battery to reduce the risk of electrical shorts. Remove the headlight assemblies according to the procedure for your particular S10 generation. Keep track of screws, clips, and brackets because they will need to be reinstalled later. Once the headlights are removed, clean the exterior of the housing. Inspect the lenses and housing for cracks or damage. A damaged housing can allow moisture inside and undermine the retrofit.Many retrofit projects require separating the lens from the housing. This is often accomplished by carefully heating the headlight assembly to soften the factory sealant. Use controlled heat and avoid overheating the plastic, since excessive temperatures can deform the housing or lens. After the sealant becomes flexible, carefully separate the lens from the housing using appropriate plastic-safe tools. Work slowly around the perimeter rather than forcing one section open. Protect the lens from scratches and contamination while the housing is apart.